Solve the Samsung Remote Blinking Red issue with these Troubleshooting Tips | Mount It Right (2023)

Samsung remote blinking red is usually an indication of low battery life or pairing issues. To fix this problem, replace the batteries or re-pair the remote with the tv.

Having a tv remote that blinks red can be frustrating, especially when you are unable to turn on/off your tv or access your favorite channels. Samsung tv remote blinking red is a common problem experienced by many owners of samsung tvs.

This problem may be caused by a variety of factors, including low battery life or pairing issues. When the red light is blinking, it is an indication that something is wrong. In this article, we will take you through some troubleshooting techniques to fix the problem and get your remote working again.

Solve the Samsung Remote Blinking Red issue with these Troubleshooting Tips | Mount It Right (1)


Check The Batteries

Samsung is a market leader in home and business electronics, and their remote controls are well-known for their reliability and ease of use. But what should you do if your remote control is blinking red? In this post, we will focus on one of the most common reasons for the blinking red light on your samsung remote: dead batteries.

We will show you how to check and replace them with a multimeter so you can continue to enjoy your entertainment without any interruption. Let’s dive in with the first subheading.

Importance Of Checking Batteries

It may seem like a no-brainer, but dead batteries can cause a lot of frustration when they suddenly die midway through your favorite movie or tv show. That’s why it’s essential to check them regularly. Here are some reasons why:

  • Batteries lose power over time, even when your remote isn’t in use. So, it’s essential to check on them periodically to make sure they still have juice.
  • Batteries can leak if left inside the remote for too long, causing damage to the device’s internal components.
  • Weak batteries can cause signal problems and make it difficult to control your tv, cable box, or other devices.

How To Remove Batteries From The Remote

Before you can check or replace the batteries, you’ll need to remove them from the remote. Here are the steps you’ll need to follow:

(Video) How to fix Samsung SMART TV Remote is Not Working, Not Responding || 10 Troubleshooting Tips

  • Turn the remote over so that the backside is facing you.
  • Locate the battery cover, which is usually located toward the bottom of the remote.
  • Slide the battery cover open, gently removing it from the remote.
  • Use your fingers to carefully remove the batteries, taking care not to damage the connections.

How To Check The Batteries With A Multimeter

To check the batteries’ voltage, you’ll need a multimeter. Here’s how to use it:

  • Turn on the digital multimeter.
  • Touch the black negative (-) probe to the battery’s negative end and the red positive (+) probe to the battery’s positive end.
  • Check the multimeter reading to see the voltage. For aa and aaa batteries, the voltage should measure 1.5v. If the voltage is lower than 1.2v, then it’s time to replace the battery.

How To Replace The Batteries

If your batteries are dead or have low voltage, you’ll need to replace them. When doing so, it’s essential to follow these steps:

  • Use high-quality batteries with the same voltage as the original batteries.
  • Insert the new batteries into the battery compartment, making sure to align the positive (+) and negative (-) poles correctly.
  • Replace the battery cover, ensuring that it snaps securely into place.
  • Test the remote to make sure it’s working correctly.

It’s always a good idea to check your remote’s batteries regularly to avoid any unexpected interruptions to your viewing pleasure. We hope this guide has been helpful in showing you how to remove, check, and replace samsung remote batteries with a multimeter.

Follow these steps, and you will be back to enjoying your favorite shows without any issues.

Reset The Remote

Importance Of Resetting The Remote

Many samsung tv owners face a common problem – their samsung remote blinking red. While this can be frustrating, a quick and easy solution is resetting the remote. Here are a few reasons why resetting the samsung remote is important:

  • It can help fix issues with the remote not functioning properly.
  • Resetting can restore the remote to its factory settings, erasing any faults or programming errors.
  • It can re-establish the connection between the remote and the tv, solving the issue of the remote blinking red.

How To Reset The Remote

Resetting the samsung remote is an easy process that can be done in a few simple steps. Here’s how:

  • Take out the batteries from the remote.
  • Press and hold the power button on the remote for around 10 seconds.
  • Release the power button and install the batteries back into the remote.
  • Press the power button again to turn on the remote.

And voila! Your samsung remote is now reset and should work fine.

What To Do If Resetting The Remote Doesn’T Work

If resetting the remote doesn’t solve the problem of your samsung remote blinking red, don’t worry. There are a few additional steps you can take.

(Video) Samsung Smart TV: How to Pair, Unpair, & Reset Remote (Remote Not Working?)

  • Check if the batteries in the remote are working. Replace the batteries with fresh ones and see if that solves the issue.
  • Make sure there are no obstructions between the remote and the tv, which can cause the remote to malfunction.
  • Try re-pairing the remote with your tv by pressing the pairing button on your tv and holding it down for a few seconds.

In case the above steps don’t work, contact samsung customer support for further assistance.

By following these simple steps, you can easily reset your samsung remote to fix any issues that arise. So, if your samsung remote is blinking red, don’t fret – just reset it and enjoy uninterrupted entertainment.

Update The Firmware

Explanation Of Firmware

Firmware refers to the software that operates the hardware components in electronic devices. It is a set of instructions coded onto a computer chip embedded within the device. The firmware tells the device how to behave, function, and interact with other software components.

In the case of a samsung remote, the firmware instructs the remote how to communicate with the tv.

Importance Of Updating Firmware

Updating firmware is crucial because it ensures that the device is running reliably and stably. The manufacturer releases firmware updates from time to time to fix any problems and to improve the device’s overall performance. Updating your samsung remote firmware not only helps solve issues but also unlocks new features and capabilities.

Failing to update may cause your device to malfunction, and it may not work correctly with the tv.

How To Check For Firmware Updates

To check for firmware updates on your samsung remote, follow these steps:

(Video) Troubleshooting Remote Control Issues for your Samsung TV | Samsung US

  • Turn on your tv and the samsung remote.
  • Press the “menu” button on your samsung remote.
  • Select “support” or “settings” from the on-screen menu.
  • Choose “software update” or “update firmware.”
  • Select “update now” and wait for the tv to check for available firmware updates.

How To Update The Firmware

Once you have confirmed that there is a firmware update available, follow these steps to update your samsung remote firmware:

  • Download the firmware update file from the manufacturer’s official website.
  • Extract the downloaded file onto a usb drive.
  • Insert the usb drive into the samsung remote’s usb port.
  • Turn on the tv and the samsung remote.
  • Press the “menu” button on your remote.
  • Select “support” or “settings” from the on-screen menu.
  • Choose “software update” or “update firmware.”
  • Select “update now using usb” and wait for the tv to complete the installation process.

By keeping your samsung remote firmware up to date, you can ensure that your remote will continue to work smoothly and will allow you to have the best possible tv viewing experience. Remember, whenever your remote blinks red, check for firmware updates, and update it if necessary!

Clean The Remote

Samsung Remote Blinking Red: Clean The Remote

Have you ever found yourself in a situation where your samsung remote control keeps blinking red? Maybe you’ve clicked okay a hundred times, or even removed and replaced the batteries, but the problem persists. Before you give up entirely or call for assistance, you should know that there may be a simple solution to the problem: cleaning the remote.

Why Cleaning The Remote Is Necessary

Cleaning the remote is an essential aspect of maintenance that can help solve various problems, including blinking red lights. If left uncleaned, remotes can collect debris and dust, which can interfere with signals being sent to the device, resulting in the device not functioning correctly.

By cleaning the remote, you remove any debris or dust that has collected on the surface, allowing for a more seamless streaming experience.

How To Clean The Remote

Cleaning your remote control doesn’t have to be a complicated process. Here are the steps you can follow to clean your samsung remote:

  • Turn off your television or device before cleaning the remote.
  • Remove the batteries from the remote.
  • Use a clean, dry cloth to wipe down the remote’s surface, or use a small brush to remove any debris from the crevices.
  • Dampen a small cloth with rubbing alcohol or a cleaning solution designed for electronics.
  • Gently clean the remote’s surface with the damp cloth, ensuring that no moisture gets into the remote’s crevices.
  • Dry the remote with a clean cloth.
  • Reinsert the batteries back into the remote and turn on the device.

Following these steps can help in eliminating the blinking red lights issue on your samsung remote.

Things To Avoid While Cleaning The Remote

It is crucial to remember the following while cleaning your remote control:

(Video) Samsung one remote control pairing - RESET

  • Avoid using any abrasive or chemical cleaning products on your remote.
  • Do not get water or moisture into the remote’s crevices.
  • Do not use any sharp objects to clean the remote as it may damage the remote.
  • Be gentle while cleaning the remote and do not put too much pressure while wiping the remote.

By keeping in mind these tips, you can keep your samsung remote in excellent condition and ensure you have an uninterrupted and smooth experience while watching your favourite shows.

Frequently Asked Questions On Samsung Remote Blinking Red

Why Is My Samsung Remote Blinking Red?

It indicates that the batteries are running low and need replacement. The red blinking light serves as a warning for you to replace the batteries soon.

What Type Of Batteries Does My Samsung Remote Require?

Most samsung tv remotes use aaa batteries. However, newer models may use aa or lithium-ion batteries. Check your remote’s battery compartment to confirm.

How Do I Replace The Batteries In My Samsung Remote?

Locate the battery compartment on the back of your remote, remove the old batteries and insert fresh ones. Confirm that the polarities are correct.

What Should I Do If Replacing The Batteries Doesn’T Stop The Blinking?

Try resetting the remote by removing the batteries, pressing all the buttons, and reconnecting the batteries. If that doesn’t work, contact samsung customer support.

Can A Samsung Tv Work Without The Remote?

Yes, you can use your smartphone as a remote by downloading the samsung smartthings app or purchase a universal remote that’s compatible with your samsung tv.


After going through this blog, we can confidently say that samsung remote blinking red is not an uncommon issue that users face. However, it can be resolved quickly with proper troubleshooting steps. Firstly, check the batteries and replace them if required.

If the problem still persists, re-pair the remote with your tv. And if nothing helps, resetting the remote might do the trick. Always keep in mind that a remote control may seem simple, but it is a complex device that requires proper care and handling.

(Video) How To Fix a Samsung Remote Control That's Not Working

Therefore, always check the manual and follow the directions for more information on how to use and fix your particular model of samsung remote. We hope that this article has helped you resolve your samsung remote blinking red issue. By following the troubleshooting steps mentioned above, you should be able to get your remote working again in no time.

Remember, a little attention to detail and careful handling can save you from a lot of hassle and expenses in the long run.


Solve the Samsung Remote Blinking Red issue with these Troubleshooting Tips | Mount It Right? ›

The blinking red light on the Samsung TV remote is a common issue. It's not serious and can be quickly fixed! All you have to do is replace your Samsung remote batteries and make sure there are no obstructions when trying to use the remote on the TV.

How do I get my Samsung remote to stop blinking red? ›

Try resetting the remote by pressing the B and C buttons. Hold them and monitor the remote light on the TV; it should flash to indicate a successful reset. Afterward, key in 981 to reprogram the remote and get it up and running again for the television. What is this?

Why is my Samsung remote flashing red and not working? ›

1) If the status light on your Samsung Remote flashes red repeatedly this means either your TV has become unpaired from the TV or your remote batteries are dead.

What is the problem of red blinking light in Samsung? ›

A flashing red light usually indicates a power supply problem. The simplest solution is often to plug your TV into a different power source. Unplug your Samsung TV and wait 30 seconds, then try plugging it into a different outlet that you know is working. Turn the TV back on and see if the problem is solved.

Why is my Samsung TV not responding to the remote? ›

However, the most common reasons for a TV remote that is not working are battery issues, paring issues, or infrared sensor issues. Press the power button while pointing the remote control at your TV. Make sure the LED indicator on the TV blinks. If not, your remote does not have enough power remaining in the batteries.

How do I pair my remote to my TV? ›

  1. Open the Settings screen. How to access Settings. If the remote control has a Quick Settings button: ...
  2. The next steps will depend on your TV menu options: Select Remotes & Accessories — Remote control — Activate the MIC button or Connect via Bluetooth. ...
  3. Follow the on-screen instructions. Notes:
Nov 7, 2022

Why is the red light on my Samsung TV remote staying on? ›

Reset the remote. Remove the batteries, and then press the Power button for eight seconds to reset the remote. Then, reinsert the batteries and try to use the remote again.

How do I fix an unresponsive remote? ›

Remove the batteries and clean the remote control terminals with a small solution of alcohol, using a cotton bud or soft cloth, then place the batteries back into the remote control. Replace with fresh batteries. Notes: Insert a battery consistent with the + pole and - pole according to the indication.

What is the code for reset Samsung remote? ›

Press the digits 2 and 8 simultaneously within 6 seconds – the LED should blink twice. Enter the code 9 8 1, the LED will blink 4 times. The remote is now reset to its factory defaults.

Why is my smart TV blinking red? ›

If a Red LED is blinking and the TV is not working properly it means that the TV has detected an issue or problem. Most Red LED blink conditions require service. The meaning of the blink codes differs between TV models. However, the number of blinking times is mostly 2 to 8.

What does red light mean on Samsung? ›

Red: Glows red when the device is connected to a charger and is charging. Blinks red when the device is connected to a charger but there is a problem with charging. Blinks red when the battery is low.

Why is the red light blinking twice on my Samsung Smart TV? ›

If your Samsung TV is blinking red, you need to reset it. Unplug your TV and wait a full 60 seconds. While the TV is unplugged, press and hold the power button for 30 seconds. After the 60 seconds are up, plug your Samsung TV back in and it should work.

What is the 123 button on the Samsung remote? ›

The user can access additional virtual keys on the TV screen by clicking the "123" key.

What is the pairing code for Samsung remote? ›

Master Your Samsung TV: Unveiling the Universal Remote Codes
Samsung Universal Remote CodesCodes
Samsung TV Universal Remote Codes One For All0178, 0030, 0056, 0019, 0587, 0060, 0093, 105, 106, 104, 101, 109
3 more rows
2 days ago

Do you have to pair a Samsung remote? ›

You can sync the remote with a different Samsung Smart TV, gaming screen, or projector at any time if you'd like, but it will only work with one device at a time. If you're going to use it with multiple products, you'll have to manually pair it each time.

How do you know if your remote is broken? ›

If you continue to see a light when no button is pressed, the remote control may need to be replaced. If it does not light up when its specific button is pressed, the button may be broken.

Why isn't my remote working with new batteries? ›

If you're experiencing issues with your remote start after changing the battery, it's possible that the coolant temperature in your vehicle is too high or the oil pressure is too low. If this is the case, then your remote starter system will be disabled.

Why is my TV remote not connecting? ›

Check whether you need a fresh pair of batteries. Perform a Power reset: Un-plug the TV power cord for 60 secs (or 2 minutes for Android TVs) and plug back in. Perform a TV software update. Perform a factory reset*

Can I connect to my TV without the remote? ›

Grab a Keyboard or Mouse

That's why the first thing you can try is to grab a USB keyboard or mouse and plug it directly into one of the USB ports on the back of your TV. If your TV accepts it, then it should allow you to control the TV, allowing you to navigate to the TV's settings and connect it to a Wi-Fi network.

Does Samsung remote charge itself? ›

Samsung has created a television remote control that doesn't require batteries, as it draws power by harvesting otherwise wasted energy emitted by Wi-Fi routers.

What does red mean on a remote? ›

The Red Button is a push-button on the remote control for certain digital television set top boxes in the UK, Australia, Belgium, Hong Kong, Malaysia, Thailand and by DirecTV and Comcast in the United States. It is for interactive television services such as BBC Red Button and Astro (Malaysia).

What is remote troubleshooting? ›

What is remote troubleshooting? Remote Troubleshooting will let you access a device that physically not in front of you and perform troubleshooting operations. Every action that you perform will be instantly reflected on the end users device.

Why does remote work fail? ›

However, despite its potential benefits, remote work is not without its challenges, and some companies struggle to make it work. One specific reason why companies fail at remote work is a lack of communication and collaboration between team members, leading to missed deadlines, confusion and decreased productivity.

What is the hard reset code for Samsung TV? ›

Factory reset the TV
  • Open Settings, and then select General.
  • Select Reset, enter your PIN (0000 is the default), and then select Reset.
  • To complete the reset, select OK. Your TV will restart automatically.
  • If these steps don't match your TV, navigate to Settings, select Support, and then select Self Diagnosis.

How do I reset my Samsung TV if it won't turn on? ›

  1. Press the menu or home button on your TV remote. If the menu appears then your TV is turned on.
  2. If your TV doesn't turn on, press any button on your TV except power. ...
  3. Unplug your TV from the power socket for 30 seconds, then plug it into a working socket. ...
  4. If your TV doesn't turn on, please contact Samsung Support.

How do I turn red mode off? ›

With the Accessibility Shortcut feature, you can triple-click the Side, Home, or Top button on your iPhone or iPad to switch between the standard screen and red tint. To set it up, go to the "Accessibility Shortcut" menu at the bottom of the Accessibility settings. Choose "Color Filters" from the list, and you're done.

What is red light mode for? ›

Red light mode

Many headlamps offer a red-light mode. Red light does not cause our pupils to shrink the way white light can, so it's good for nighttime use.

Why is my TV not turning on but red light is on? ›

Normally it means the battery in the remote is going bad. First try turning on the tv with the manual power button on the set itself. If that works, then change the batteries in the remote.

How do you unfreeze a Samsung remote? ›

Remove the batteries, and then press the Power button for eight seconds to reset the remote. Then, reinsert the batteries and try to use the remote again.

How do I reset my Samsung remote without batteries? ›

On more recent Samsung smart TVs and remotes, press and hold the back button and the large circular Enter button for at least ten seconds to reset the remote to factory settings.

What causes remote to freeze up? ›

It is said that the issue is because the RDP protocol has lost some of its resilience to packets getting lost or out of order. Moreover, this may be triggered by the bug in Windows 10 that is unable to switch between TCP and UDP protocol seamlessly. Therefore, what we should do is prevent UDP and switch to TCP.

Is there a reset button on a Samsung TV? ›

Open Settings, and then select General. Select Reset, enter your PIN (0000 is the default), and then select Reset. To complete the reset, select OK. Your TV will restart automatically.

Why is my remote blinking red? ›

Replace the batteries with new ones. In some Samsung smart TV remotes, you'll see the red light blinking as an indication the remote's battery is dying.


1. How To Reset Samsung's TV LCD LED Remote Control | Fixed Samsung TV Remote Control Not Work
(I W Official)
2. Samsung Frame TV 2022 - Pairing the remote and resetting the remote
(Deco TV Frames)
3. How to Fix Samsung TV Remote Not Working or Responding - 11 Fixes!
(Smart Home Starter)
4. How to Access Secret "Service Menu" for All Samsung TVs
5. How to Reset Samsung Soundbar: A Step-by-Step Guide
(HiFi Audios)
6. How to reset and use the buttons on your 2021 Samsung TV Smart remote | Samsung US
(Samsung Care)


Top Articles
Latest Posts
Article information

Author: Nathanial Hackett

Last Updated: 31/07/2023

Views: 5314

Rating: 4.1 / 5 (52 voted)

Reviews: 83% of readers found this page helpful

Author information

Name: Nathanial Hackett

Birthday: 1997-10-09

Address: Apt. 935 264 Abshire Canyon, South Nerissachester, NM 01800

Phone: +9752624861224

Job: Forward Technology Assistant

Hobby: Listening to music, Shopping, Vacation, Baton twirling, Flower arranging, Blacksmithing, Do it yourself

Introduction: My name is Nathanial Hackett, I am a lovely, curious, smiling, lively, thoughtful, courageous, lively person who loves writing and wants to share my knowledge and understanding with you.